Asus P6T User Manual download pdf (Page 69)

ASUS P6T SE 3-13

Chapter 3

3.5.2 CPU Ratio Setting [Auto]

Allows you to adjust the ratio between CPU Core Clock and BCLK Frequency. Use the <+>

and <-> keys to adjust the value.

Conguration options: [Auto] [12.0] [13.0] [14.0] [15.0] [16.0] [17.0] [18.0] [19.0] [20.0]

3.5.3 Intel(R) SpeedStep(TM) Tech [Enabled]

When set to [Disabled], the CPU runs at its default speed. When set to [Enabled], the CPU

speed is controlled by the operating system. Conguration options: [Disabled] [Enabled]

3.5.4 Intel(R) Turbo Mode Tech [Enabled]

Turbo mode allows processor cores to run faster than marked frequency in specic condition.

Conguration options: [Disabled] [Enabled]

The following two items appear only when you set the Ai Overclock Tuner item to

[Manual], [D.O.C.P.] or [X.M.P.].

BCLK Frequency [XXX]

Allows you to adjust the Internal Base Clock (BCLK). Use the <+> and <-> keys to adjust the

value. You can also type the desired value using the numeric keypad. The values range from

100 to 500.

PCIE Frequency [XXX]

Allows you to set the PCI Express frequency. Use the <+> and <-> keys to adjust the PCIE

frequency. The values range from 100 to 200.

DRAM O.C. Profile [DDR3-1805MHz]

This item appears only when you set the Ai Overclock Tuner item to [D.O.C.P.] and

allows you to select a DRAM O.C. prole, which applies different settings to DRAM

frequency, DRAM timing and DRAM voltage.

Conguration options: [DDR3-2006MHz] [DDR3-1805MHz]

eXtreme Memory Profile [High Performance]

This item appears only when you set the Ai Overclock Tuner item to [X.M.P.] and

allows you to select the X.M.P. mode supported by your memory module.

Conguration options: [High Performance] [High Frequency]

The conguration options for the following sub-item vary depending on the DIMMs you

install on the motherboard.

To obtain the best performance of the X.M.P. DIMM or 1600MHz DIMM, install only one

DIMM on each memory channel.

1 ... 68 69 70 ... 112

No comments

Asus P6T User Manual Page 69