Asus A8V-VM User Manual download pdf (Page 41)

1-29ASUS A8V-VM

• Werecommendthatyouconnectahigh-denitionfrontpanel

audiozmodule to this connector to avail of the motherboard high-

denitionaudiocapability.

• Ifyouwanttoconnectahigh-denitionfrontpanelaudiomoduleto

this connector, make sure the Audio Controller item in the BIOS is

set to [Enabled]. See page 2-22 for details.

9. Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module

thatsupportseitherHighDenitionAudioorAC`97audiostandard.

Connect one end of the front panel audio I/O module cable to this

connector.

A8V-VM Analog Front Panel Connector

AC 97 audio

pin definition

AAFP

Back line out L

AGND

Line out_R

Line out_L

Back line out R

+5VA

AGND

SENSE2_RETUR

PORT1 L

PORT2 R

PORT2 L

SENSE1_RETUR

SENSE_SEND

PORT1 R

PRESENCE#

GND

A8V-VM

10. Chassis intrusion connector (4-1 pin CHASSIS)

This connector is for a chassis-mounted intrusion detection sensor

or switch. Connect one end of the chassis intrusion sensor or switch

cable to this connector. The chassis intrusion sensor or switch sends

a high-level signal to this connector when a chassis component

is removed or replaced. The signal is then generated as a chassis

intrusion event.

By default, the pins labeled “Chassis Signal” and “Ground” are shorted

with a jumper cap. Remove the jumper caps only when you intend to

use the chassis intrusion detection feature.

A8V-VM Chassis Intrusion Connector

A8V

CHASSIS

+5VSB_MB

Chassis Signal

GND

(Default)

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 83 84

Comments to this Manuals

No comments

Asus A8V-VM User Manual Page 41

Comments to this Manuals