1Xonar HDAV1.3 DVD/Blu-ray Disc Playback User Guide Version: V.0.90 Date: 2008/9/15 This document is to describe the critical software setup steps
10 8. In this mode, you are able to adjust the DVD sound volume, your multi-speaker placement and surround soundfield virtually by 7.1 Virtual Spea
11 4. Open TotalMedia TheatreÎSetupÎAudio 5. Select “5.1 Channels” in Audio Output Mode 6. Press Apply first, and then press OK. Please start pla
12Scenario 6: Use Dolby Virtual Speaker virtualized 5.1 surround sounds over stereo or 2.1 speakers (for DVD/Blu-ray disc) 1. Open Xonar HDAV Cente
13 Windows Vista 32/64 (HBR audio bit-stream pass-through will be supported by upgraded TMT player version in the near future) Scenario 1: Hig
14 2. Select HDMI mode for HDMI output or Sound Card mode for analog output in Xonar HDAV Center audio page 3.Select “8 Channels” in Audio Channel m
155.Select “7.1 Channels” or other correspondent channel numbers with your speaker type in Audio Output Mode (TMT will output LPCM audio data after d
16 Set the same 192KHz sample rate as the content above. Scenario 2: Dolby Digital/DTS 5.1 bitstream pass-through by SPDIF/HDMI (for DVD/Blu-ray
171. Set “Digital Output Device” as the default playback device in Sound setting in Vista first 2. Open Xonar HDAV Center 3. Enable “SPDIF Out”
18 4. Open TotalMedia TheatreÎSetupÎAudio 5. Select “S/PDIF” in Audio Output Mode 6. Press Apply first, then press OK. You can start playback now.
19 2. Open Xonar HDAV Center 3. Enable “S/PDIF Out” in Sound Card mode or select HDMI mode for HDMI output 4. Set “6 Channels” or “8 Channels” in Aud
27. 256 MB graphics card or above 8. HDCP compliant display for digital output (HDMI connection); TV or VGA monitor for analog output TotalMedia The
206. Select “7.1 Channels” in Audio Output Mode (TMT will output LPCM audio data after decoding and Xonar will add DSP effects and tanscode it into A
212. Open Xonar HDAV Center and select Sound Card mode page 3. Select “6 Channels” or “8 Channels” in Audio Channel and “Headphone” in Analog Out 4.
22 Scenario 5: Use Dolby Virtual Speaker virtualized 5.1 surround sounds over stereo or 2.1 speakers (for DVD/Blu-ray disc) 1. Set “Speakers” as t
23 4. Open TotalMedia TheatreÎSetupÎAudio 5. Select “5.1 Channels” in Audio Output Mode 6. Press Apply first, then press OK. Please start playback.
3 Scenario 1: DTS-HD Master Audio, DTS-HD High Resolution Audio, Dolby Digital Plus bit-stream pass-through to AV receiver by HDMI 1.3 connection (f
4 Scenario 2: High-Bit-Rate audio decoding lossless LPCM output (DTS-HD Master Audio, DTS-HD High Resolution Audio, Dolby Digital Plus, & Dolby
5 3. Open TotalMedia TheatreÎSetupÎAudio 4. Select “7.1 Channels” or other correspondent channel numbers with your speaker type in Audio Output Mode
6 6.Select correspondent Sample Rate in Xonar AV Center consistent with the playing disc audio format displayed in TMT screen (right-click mouse to
7 Set the Sample Rate in Xonar as the content’s format. Scenario 3: Dolby Digital/DTS 5.1 bitstream pass-through by SPDIF/HDMI (for DVD/Blu-ray di
8HDMI output 3. Open TotalMedia TheatreÎSetupÎAudio 4 .Select “S/PDIF” in Audio Output Mode (TMT will output AC3/DTS bitstream) 5. Uncheck “Enable
9 Scenario 4: Add sound effects and use DDL/DTS Connect transcoding output by SPDIF/HDMI (for DVD/Blu-ray disc) 1. Open Xonar HDAV Center 2. Enab
Comments to this Manuals