Asus M2N-XE Specifications download pdf (Page 45)

ASUS M2N-MX SE

2-3

2. Copy the original or the latest motherboard BIOS le to the bootable

oppy disk.

2.1.2 ASUS EZ Flash utility

The ASUS EZ Flash feature allows you to update the BIOS without having

to go through the long process of booting from a oppy disk and using

a DOS-based utility. The EZ Flash utility is built-in the BIOS chip so it is

accessible by pressing <Alt> + <F2> during the Power-On Self Tests

(POST).

To update the BIOS using EZ Flash:

1. Visit the ASUS website (www.asus.com) to download the latest BIOS

le for the motherboard and rename the same to M2N-MXSE.ROM.

2. Save the BIOS le to a oppy disk, then restart the system.

3. Press <Alt> + <F2> during POST to display the following.

EZFlash starting BIOS update

Checking for oppy...

4. Insert the oppy disk that contains the BIOS le to the oppy disk

drive. When the correct BIOS le is found, EZ Flash performs the BIOS

update process and automatically reboots the system when done.

EZFlash starting BIOS update

Checking for oppy...

Floppy found!

Reading le “M2N-MXSE.rom”. Completed.

Start erasing.......|

Start programming...|

Flashed successfully. Rebooting.

• Do not shut down or reset the system while updating the BIOS to

prevent system boot failure!

• A “Floppy not found!” error message appears if there is no oppy

disk in the drive. A “M2N-MXSE.ROM not found!” error message

appears if the correct BIOS le is not found in the oppy disk. Make

sure that you rename the BIOS le to M2N-MXSE.ROM.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 87 88

No comments

Asus M2N-XE Specifications Page 45