Asus M2N32-SLI User Manual download pdf (Page 48)

2-22 Chapter 2: Hardware information

14. Optical S/PDIF Out port. This port connects an external audio output device

via an optical S/PDIF cable.

15. Coaxial S/PDIF Out port.

This port connects an external audio output device

via a coaxial S/PDIF cable.

16. PS/2 keyboard port (purple)

. This port is for a PS/2 keyboard.

For Wireless Edition only:

Please refer to the wireless user guide for detail conguration and settings.

17. Wireless LAN port

. This port is on the onboard wireless LAN module that

allows you to set up a wireless network and exchange information with other

wireless devices without tangling cables and wires. Connect the moveable

omni-directional antenna to this port.

18.

Wireless LAN Activity LED. The wireless module comes with an activity

LED.

• Do not insert a different connector to this port.

• DO NOT unplug the external Serial ATA box when a RAID 0 or JBOD is

congured.

• Before creating a RAID set using Serial ATA hard disks, make sure that you

have connected the Serial ATA signal cable and installed Serial ATA hard

disk drives; otherwise, you cannot enter the Silicon Image RAID utility and

SATA BIOS setup during POST.

• If you intend to create a RAID conguration using this connector, set the

Silicon 3132 Controller item in the BIOS to [RAID Mode]. See section “4.4.7

Onboard Device Conguration” for details.

• Use these ports and an external Serial ATA box connected to the external

SATA port, if you want to congure a RAID 0 or RAID 1 set.

• The Serial ATA port multiplier and external Serial ATA box are purchased

separately.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 169 170

No comments

Asus M2N32-SLI User Manual Page 48