Asus M2V User Manual download pdf (Page 37)

ASUS M2V

2-15

2.4.3 Installing a DIMM

Unplug the power supply before adding or removing DIMMs or other

system components. Failure to do so can cause severe damage to both the

motherboard and the components.

To install a DIMM:

1. Unlock a DIMM socket by

pressing the retaining clips

outward.

2. Align a DIMM on the socket

such that the notch on the DIMM

matches the break on the socket.

3. Firmly insert the DIMM into the

socket until the retaining clips

snap back in place and the

DIMM is properly seated.

2.4.4 Removing a DIMM

To remove a DIMM:

1. Simultaneously press the retaining

clips outward to unlock the DIMM.

2. Remove the DIMM from the socket.

• A DDR2 DIMM is keyed with a notch so that it ts in only one direction. Do

not force a DIMM into a socket to avoid damaging the DIMM.

• The DDR2 DIMM sockets do not support DDR DIMMs. DO not install DDR

DIMMs to the DDR2 DIMM sockets.

Support the DIMM lightly with

your ngers when pressing the

retaining clips. The DIMM might

get damaged when it ips out

with extra force.

DDR 2 DI MM n ot ch

Unl oc ke d re ta in in g c li p

DDR 2 DI MM n ot ch

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 117 118

No comments

Asus M2V User Manual Page 37