Asus P5GPL-X SE User Manual download pdf (Page 40)

1-28 Chapter 1: Product introduction

2. Floppy disk drive connector (34-1 pin FLOPPY)

This connector is for the provided oppy disk drive (FDD) signal cable.

Insert one end of the cable to this connector, then connect the other

end to the signal connector at the back of the oppy disk drive.

Pin 5 on the connector is removed to prevent incorrect cable connection

when using an FDD cable with a covered Pin 5.

P5GPL-X

NOTE: Orient the red markings on

the floppy ribbon cable to PIN 1.

P5GPL-X SE Floppy disk drive connector

FLOPPY

PIN 1

3. CPU and chassis fan connectors

(4-pin CPU_FAN, 3-pin CHA_FAN)

The fan connectors support cooling fans of 350mA~2000mA (24W

max.) or a total of 1A~3.48A (41.36W max.) at +12V. Connect the

fan cables to the fan connectors on the motherboard, making sure

that the black wire of each cable matches the ground pin of the

connector.

Do not forget to connect the fan cables to the fan connectors.

Insufcient air ow inside the system may damage the motherboard

components. These are not jumpers! DO NOT place jumper caps on the

fan connectors.

P5GPL-X

P5GPL-X SE Fan connectors

CPU_FAN

CHA_FAN

GND

CPU FAN PWR

CPU FAN IN

CPU FAN PWM

GND

Rotation

+12V

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 93 94

No comments

Asus P5GPL-X SE User Manual Page 40