Asus H61M-K User Manual download pdf (Page 61)

ASUS H61M-K

2-19

Due to H61 Chipset limitation, AHCI Mode only works on Windows

Vista / Windows

Please use IDE Mode on Windows

XP.

S.M.A.R.T. Status Check [Enabled]

S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When

read/write of your hard disk errors occur, this feature allows the hard disk to report warning

messages during the POST. This item appears only when you set the previous item to [IDE]

or [AHCI]. Conguration options: [Enabled] [Disabled]

Hot Plug [Disabled]

This item only appears when you set the SATA Mode Selection item to [AHCI] and allows you

to enable or disable the hot-plug support for each SATA port. Conguration options: [Enabled]

[Disabled]

2.5.4 System Agent Conguration

Memory Remap Feature [Enabled]

[Enabled] Allow you to enable remapping the memory above 4GB.

[Disabled] Disables this function.

Graphics Conguration

Primary Display [Auto]

Allows you to decide which graphics controller to use as the primary boot device.

Conguration options: [Auto] [iGPU] [PCIE]

2.5.3 SATA Conguration

While entering Setup, the BIOS automatically detects the presence of SATA devices. The

SATA Port items show Not Present if no SATA device is installed to the corresponding SATA

port.

SATA Mode Selection [AHCI]

Allows you to set the SATA conguration.

[IDE] Set to [IDE] when you want to use the Serial ATA hard disk drives as

Parallel ATA physical storage devices.

[AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the AHCI

(Advanced Host Controller Interface). The AHCI allows the onboard storage

driver to enable advanced Serial ATA features that increases storage

performance on random workloads by allowing the drive to internally

optimize the order of commands.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 81 82

No comments

Asus H61M-K User Manual Page 61