Asus CUV4X-DLS User Manual download pdf (Page 34)

34 ASUS CUV4X-DLS User’s Manual

3. HARDWARE SETUP

Connectors

3. H/W SETUP

3.8.2 Internal Connectors

1) IDE Activity LED (2-pin IDELED)

This connector supplies power to the cabinet’s IDE activity LED. Read and

write activity by devices connected to the Primary or Secondary IDE connectors

cause the IDE LED to light up.

2) Floppy Disk Drive Connector (34-1 pin FLOPPY)

This connector supports the provided floppy drive ribbon cable. After connecting

the single end to the board, connect the two plugs on the other end to the floppy

drives. (Pin 5 is removed to prevent inserting in the wrong orientation when

using ribbon cables with pin 5 plugged).

CUV4X-DLS

CUV4X-DLS IDE Activity LED

TIP: If the case-mounted LED does not

light, try reversing the 2-pin plug.

IDELED

CUV4X-DLS

NOTE: Orient the red markings on

the floppy ribbon cable to

PIN 1

CUV4X-DLS Floppy Disk Drive Connector

PIN 1

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 99 100

No comments

Asus CUV4X-DLS User Manual Page 34