Asus CUWE User Manual download pdf (Page 35)

ASUS CUWE User’s Manual 35

3. HARDWARE SETUP

Connectors

3. H/W SETUP

12) Wake-On-LAN Connector (3-pin WOL_CON)

This connector connects to a LAN card with a Wake-On-LAN output, such as

the ASUS PCI-L101 Ethernet card (not required for onboard LAN model). The

connector powers up the system when a wakeup packet or signal is received

through the LAN card.

IMPORTANT: This feature requires that Wake On LAN is set to Enabled (see

4.5.1 Power Up Control) and that your system has an ATX power supply with at

least 720mA +5V standby power.

0 10 10 1

CUWE

CUWE Wake-On-LAN Connector

IMPORTANT: Requires an ATX power

supply with at least 720mA +5 volt

standby power

+5 Volt StandbyPME

Ground

WOL_CON

13) Wake-On-Ring Connector (2-pin WOR)

This connector connects to internal modem cards with a Wake-On-Ring output.

The connector powers up the system when a ringup packet or signal is received

through the internal modem card. NOTE: For external modems, Wake-On-Ring

is detected through the COM port.

IMPORTANT: This feature requires that PWR Up On Modem Act is set to

Enabled (see 4.5.1 Power Up Control) and that your system has an ATX power

supply with at least 720mA +5V standby power.

CUWE Wake-On-Ring Connector

WOR

RI#Ground

0 10 10 1

CUWE

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 135 136

No comments

Asus CUWE User Manual Page 35