Asus P2-99 User Manual download pdf (Page 49)

ASUS P2-99 User’s Manual 49

IV. BIOS SETUP

Chipset Features

16-bit I/O Recovery Time (1 BUSCLK) / 8-bit I/O Recovery Time (1 BUSCLK)

Timing for 16-bit and 8-bit ISA cards, respectively. Leave on default setting.

Graphics Aperture Size (64MB)

Memory-mapped, graphics data structures can reside in a Graphics Aperture. Leave

on default setting.

Video Memory Cache Mode (UC)

USWC (uncacheable, speculative write combining) is a new cache technology for

the video memory of the processor. It can greatly improve the display speed by

caching the display data. You must leave this on the default setting of UC

(uncacheable) if your display card cannot support this feature, otherwise your sys-

tem may not boot.

PCI 2.1 Support (Enabled)

This function allows you to enable or disable PCI 2.1 features including passive release

and delayed transaction. Leave Enabled (default setting) for PCI 2.1 compliancy.

Memory Hole At 15M–16M (Disabled)

Enabling this feature reserves 15MB to 16MB memory address space to ISA expan-

sion cards that specifically require this setting. This makes the memory from 15MB

and up unavailable to the system. Expansion cards can only access memory up to

16MB. The default is Disabled.

....................................................................................................................................

Onboard FDC Controller (Enabled)

When Enabled, this field allows you to connect your floppy disk drives to the onboard

floppy disk drive connector instead of a separate controller card. If you want to use a

different controller card to connect the floppy disk drives, set this field to Disabled.

Onboard FDC Swap A & B (No Swap)

This field allows you to reverse the hardware drive letter assignments of your floppy

disk drives. Two options are available: No Swap and Swap AB. If you want to switch

drive letter assignments through the onboard chipset, set this field to Swap AB.

Onboard Serial Port 1 (3F8H/IRQ4)

Settings are 3F8H/IRQ4, 2F8H/IRQ3, 3E8H/IRQ4, 2E8H/IRQ10, and Disabled for

the onboard serial connector.

Onboard Serial Port 2 (2F8H/IRQ3)

Settings are 3F8H/IRQ4, 2F8H/IRQ3, 3E8H/IRQ4, 2E8H/IRQ10, and Disabled for

the onboard serial connector.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 95 96

No comments

Asus P2-99 User Manual Page 49