Asus P4PE User's Guide Page 61

  • Download
  • Add to my manuals
  • Print
  • Page
    / 142
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 60
ASUS P4PE motherboard user guide
3-3
POST Message Action
You may disable the ASUS POST Reporter in the BIOS setup. See
section 4.4.2 I/O Device Configuration.
No keyboard detected Check your keyboard if properly
connected to the purple PS/2
connector on the rear panel.
See section 1.4.1 Major
components for the location of the
connector.
No floppy disk detected Make sure you have connected a
floppy disk to the floppy disk
connector on the motherboard.
See section 2.8 Connectors.
No IDE hard disk detected Make sure you have connected an
IDE hard disk drive to the one of the
IDE connectors on the motherboard.
See section 2.8 Connectors.
CPU temperature too high Check CPU fan if working properly.
CPU fan failed Check the CPU fan and make sure
it turns on after you applied power
to the system.
Make sure that your CPU fan
supports the fan speed detection
function.
CPU voltage out of range Check your power supply and
make sure it is not defective.
Call ASUS technical support for
assistance. See the ASUS contact
information on page x.
System completed Power-On Self Test No action required
Computer now booting from operating No action required
system
Page view 60
1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 141 142

Comments to this Manuals

No comments