Asus P5W DH DELUXE Specifications Page 187

  • Download
  • Add to my manuals
  • Print
  • Page
    / 212
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 186
ASUS P5W DH Deluxe 5-61
5.4.5 Cross-RAID Conguration: Creating a RAID 10 set
with ASUS EZ-Backup and Intel ICH7R
®
A RAID 10 set requires four HDDs. The onboard RAID controller on the Intel
®
ICH7R Southbridge, however, controlls only three Serial ATA connectors. To build a
RAID 10 set, you need to cross-congure Intel
®
ICH7R with Silicon Image
®
, which
controls the EZ_RAID connectors for the EZ-Backup feature.
Refer to the succeeding sections to build a RAID 10 set.
Hardware setup
1. Install one Serial ATA HDD on the motherboard connector labeled EZ_RAID1.
2. Install three Serial HDDs on the motherboard connectors labled SATA1,
SATA3, and SATA4.
EZ Backup jumper setting and BIOS configuration
For information on EZ-Backup jumper setting and BIOS conguration, see
section “5.4.4 Silicon Image RAID conguration.”
1. After installing the Serial ATA hard disks, set the jumper setting to the default
RAID 1 mode.
2. Turn the system on, and enter the BIOS setup during POST. Go to Advanced
menu > DH Feature page. Set the EZ Backup RAID Mode Change item to
Enabled (if the jumper setting has been changed).
3. Press <F10> to save and exit. The system will restart.
Page view 186
1 2 ... 182 183 184 185 186 187 188 189 190 191 192 ... 211 212

Comments to this Manuals

No comments