Asus WL-500gP User Manual download pdf (Page 29)

WL-500gP Wireless Router User Manual

Enable Security Mode?

-Select

Yes to enable security function on

the data and time you set below.

Date to Enable Security Mode

This field defines the date that

Security Mode is enabled.

Time to Enable Security Mode

This ﬁeld deﬁnes the time interval

that Security Mode is enabled.

Send to

- Input the E-mail address you wish WL-500gP send the image to.

Email Server

- This ﬁeld indicates the E-mail server you use for exchanging E-mail. If you

leave this ﬁeld blank, WL-500gP uses the mail server of your E-mail address in

Send to

ﬁeld.

Subject

- This ﬁeld is for the subject of E-mail.

Attach Image File?

- This ﬁeld allows you to attach the captured image in the E-mail.

Remote monitors

This function allows you to monitor up to 6 Web Cameras in your LAN. You can enter

the IP addresses of other ASUS Wireless Routers which have Web Camera attached.

Note:

When enabling "LAN and WAN" remote control in the Wireless Router, packets

from Internet with destination ports 8081 to 8086 will be forwarded to WL-500gP

in Remote Control ﬁelds. To makes sure packets from WL-500gP are routed back

to Internet, you need to set a static route entry for WL-500gP. The IP address and

gateway address are same as the address of WL-500gP.

Enable Web Camera to WAN users

With proper setting to DDNS, you can monitor your working environment from

anywhere on Internet, even if dynamic WAN IP address is used. If any motion is

detected by the camera, WL-500gP captures the images and send them to your

appointed E-mail box. Refer to page 15-17 for DDNS setup procedures.

5. By default, these three items are enabled.

Enable them if changed.

6. Click

Yes

to change the security settings.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 41 42

No comments

Asus WL-500gP User Manual Page 29