Asus D300 D302 D304 User Manual

Universal display unit D300S User guide Software version V1.21 Operating system V1.05

Version 1.0 – 07.2012 10 User interface When you first switch on your D300S unit, the default interface will be active as shown below.

Version 1.0 – 07.2012 11 The Setting menu This menu enables the modification of all system parameters. The setting menu tree Ma

Version 1.0 – 07.2012 12 General setting This menu allows you to configure the general parameters of your unit. It is, amongst other things, pos

Version 1.0 – 07.2012 13 Measurement mode Direct : displays the value live Max : displays the maximum value Min : displays the minimum val

Version 1.0 – 07.2012 14 Statistics This mode enables the display of statistics. They are calculated individually per channel and are based on t

Version 1.0 – 07.2012 15 The chart over the range (R) UCL : Upper control limit   LCL : Lower control limit 

Version 1.0 – 07.2012 16 Communication with a PC The D300S can be managed from a PC via the « USB-PC » input. Retro-commands are used to this en

Version 1.0 – 07.2012 17 Retro-command codes list Command Function ? The unit sends the value of the active channels ?x x = channel nb (1 to 64)

Version 1.0 – 07.2012 18 KEY1 Locks the keyboard and tactile screen STO?x (x = 1 to 64) Returns recorded values of the requested channel Only wo

Version 1.0 – 07.2012 19 Configuration example with two measurement points Step 1 : Display configuration We start by configuring the number

Version 1.0 – 07.2012 2

Version 1.0 – 07.2012 20 Step 2 : Channel attribution and configuration One the display is configured, we can select the instruments that will b

Version 1.0 – 07.2012 21 By moving the instrument, the value will also move on the A and B displays. This enables one to check the instrument se

Version 1.0 – 07.2012 22 Step 5 : Visualisation of recorded values To visualise the recorded values, you must select the System setting → Store

Version 1.0 – 07.2012 23

Version 1.0 – 07.2012 24 E-mail: [email protected] Web site: www.sylvac.ch Edition 2012.07 / Version 1.0

Version 1.0 – 07.2012 3 Table of contents General description ...

Version 1.0 – 07.2012 4 General description The D300S is a display unit enabling the visualisation of the entire Sylvac hand instrument range an

Version 1.0 – 07.2012 5 Connections description 1 8.5’’ touch screen 2 Configurable user interface 3 IP65 front panel 4 Navigation buttons 5 Nu

Version 1.0 – 07.2012 6 Power Switch Allows the complete switching off of the unit Sustain pedal input Two pedals can be connected. Two extra ex

Version 1.0 – 07.2012 7 Digital outputs N° Function 1 Output isolated by optocoupler 2 Output isolated by optocoupler 3 Output isolated by

Version 1.0 – 07.2012 8 Example to connect a LED on the n°1 digital output Example to connect a relay on a n°1 digital output (extern

Version 1.0 – 07.2012 9 Example to connect a relay on a n°1 digital output (internal power supply) Note: a protective diode must be