Asus B85M-E/CSM Specifications download pdf (Page 17)

ASUS B85M-E

1-9

2. RemovetheDIMMfromthesocket.

SupporttheDIMMlightlywith

yourngerswhenpressingthe

retainingclips.TheDIMMmight

getdamagedwhenitipsout

with extra force.

DIMM notch

1.5 Expansion slots

Inthefuture,youmayneedtoinstallexpansioncards.Thefollowingsub-sectionsdescribe

the slots and the expansion cards that they support.

Unplugthepowercordbeforeaddingorremovingexpansioncards.Failuretodosomay

cause you physical injury and damage motherboard components.

1.5.1 Installing an expansion card

To install an expansion card:

1. Beforeinstallingtheexpansioncard,readthedocumentationthatcamewithitand

make the necessary hardware settings for the card.

2. Removethesystemunitcover(ifyourmotherboardisalreadyinstalledinachassis).

3. Removethebracketoppositetheslotthatyouintendtouse.Keepthescrewforlater

use.

4. Alignthecardconnectorwiththeslotandpressrmlyuntilthecardiscompletely

seated on the slot.

5. Securethecardtothechassiswiththescrewyouremovedearlier.

6. Replacethesystemcover.

1.5.2 Configuring an expansion card

Afterinstallingtheexpansioncard,congureitbyadjustingthesoftwaresettings.

1. TurnonthesystemandchangethenecessaryBIOSsettings,ifany.SeeChapter2for

informationonBIOSsetup.

2. AssignanIRQtothecard.

3. Installthesoftwaredriversfortheexpansioncard.

WhenusingPCIcardsonsharedslots,ensurethatthedriverssupport“ShareIRQ”orthat

thecardsdonotneedIRQassignments.Otherwise,conictswillarisebetweenthetwoPCI

groups,makingthesystemunstableandthecardinoperable.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 74 75

No comments

Asus B85M-E/CSM Specifications Page 17