Asus P5GD2 PREMIUM Specifications Page 51

  • Download
  • Add to my manuals
  • Print
  • Page
    / 156
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 50
ASUS P5GD2 PremiumASUS P5GD2 Premium
ASUS P5GD2 PremiumASUS P5GD2 Premium
ASUS P5GD2 Premium
2-272-27
2-272-27
2-27
5.5.
5.5.
5.
Serial ATA RAID connectors (7-pin SATA_RAID1,Serial ATA RAID connectors (7-pin SATA_RAID1,
Serial ATA RAID connectors (7-pin SATA_RAID1,Serial ATA RAID connectors (7-pin SATA_RAID1,
Serial ATA RAID connectors (7-pin SATA_RAID1,
SATA_RAID2, SATA_RAID3, SATA_RAID4)SATA_RAID2, SATA_RAID3, SATA_RAID4)
SATA_RAID2, SATA_RAID3, SATA_RAID4)SATA_RAID2, SATA_RAID3, SATA_RAID4)
SATA_RAID2, SATA_RAID3, SATA_RAID4)
These connectors are for Serial ATA signal cables. These connectors
support up to four Serial ATA hard disk drives that can be configured
as a disk array through the onboard SATA RAID controller. Refer to
Chapter 5 for details on how to set up Serial ATA RAID configurations.
Before creating a RAID configuration, make sure that you have
connected the Serial ATA cables to these connectors and have
installed the Serial ATA hard disks drives; otherwise, you cannot
enter the Silicon Image RAID utility and Serial ATA BIOS setup during
POST.
You can only create a RAID 5 and JBOD configuration using the
SATALink™ Serial ATA RAID Management software. See section
“5.2.2 Silicon Image RAID Configurations” for details.
The RAID 5 driver is not Windows Hardware Quality Labs (WHQL)
certified.
All four Serial ATA ports are master ports. You can install Serial ATA
boot disks to any of these ports.
P5GD2 PREMIUM
R
P5GD2 PREMIUM SATA RAID connectors
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXP2
RSATA_RXN2
GND
SATA_RAID1
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXP1
RSATA_RXN1
GND
SATA_RAID2
GND
RSATA_TXP4
RSATA_TXN4
GND
RSATA_RXP4
RSATA_RXN4
GND
SATA_RAID3
GND
RSATA_TXP3
RSATA_TXN3
GND
RSATA_RXP3
RSATA_RXN3
GND
SATA_RAID4
These connectors are set to RAID mode by default. If you want to
connect Serial ATA boot/data hard disk drives to these connectors, set
the
Silicon Image ControllerSilicon Image Controller
Silicon Image ControllerSilicon Image Controller
Silicon Image Controller item in the BIOS to
SATA ModeSATA Mode
SATA ModeSATA Mode
SATA Mode. See
section “4.4.6 Onboard Devices Configuration” on page 4-27 for details.
Page view 50
1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 155 156

Comments to this Manuals

No comments