Asus TS300-E5 User Manual download pdf (Page 164)

6-38 Chapter 6: RAID conguration

6.3.6 Resetting disks to Non-RAID

Take caution before you reset a RAID volume hard disk drive to non-RAID.

Resetting a RAID volume hard disk drive deletes all internal RAID structure on

the drive.

To reset a RAID set hard disk drive:

1. From the utility main menu, select 3. Reset Disks to Non-RAID, then press

<Enter> to display this screen.

2. Use the up/down arrow key to highlight the RAID set drive you want to reset,

then press <Space> to select.

3. Press <Enter> to reset the RAID set drive. A conrmation message appears.

4. Press <Y> to reset the drive or press <N> to return to the utility main menu.

5. Follow steps 2 to 4 to select and reset other RAID set drives.

[ RESET RAID DATA ]

Resettin g RAID d a t a w i ll r emov e internal RAID s t r u ctur e s

from the selected RAID disks. By removing these structures,

thedrivewillrevertbacktoanon-RAIDdisk.

WARNING:Resettingadiskcausesalldataonthedisktobelost.

Port Drive Model Serial # Size Status

0 XXXXXXXXXXXX XXXXXXXX XX.XGB M e m b e r  D i s k

1 XXXXXXXXXXXX XXXXXXXX XX.XGB MemberDisk

Selectthedisksthatshouldbereset.

[↑↓]-Previous/Next[SPACE]-Selects[ENTER]-SelectionComplete

6.3.7 Rebuilding the RAID

This option is only for the RAID 1, RAID 5 and RAID 10 level.

Rebuilding the RAID with other non-RAID disk:

1. If one member of physical SATA Hard disk within the array is off-line or failed,

the status of array will become to be degraded from normal. The following

displays as:

1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 217 218

No comments

Asus TS300-E5 User Manual Page 164