Asus RT-N11 User Manual download pdf (Page 7)

RT-N11 EZ Wireless N Router User Manual

The ASUS RT-N11 Wireless Router meets various working scenarios with proper

conguration. The default settings of the wireless router may change to meet your individual

needs. Thus, before using the wireless router, check the basic settings to ensure that they all

work in your environment.

Note:

We recommend

wired connection for the initial conguration to avoid possible

setup problems due to wireless uncertainty.

1) Wired connection

An Ethernet cable is bundled with your RT-N11 package. The wireless router has an

integrated auto-crossover function. Use either a straight-through or a crossover cable for

wired connection. Plug one end of the cable to the LAN port on the rear panel of the router

and the other end to the Ethernet port on your PC.

2) Wireless connection

For establishing wireless connection, you need an IEEE 802.11b/g/n compatible WLAN card.

Refer to the user manual of your wireless router for the wireless connection procedures. By

default, the SSID of the wireless router is “default” (in lower case), encryption is disabled, and

open system authentication is used.

3) Setting IP address for wired or wireless client

To access the RT-N11 Wireless Router, you must have the correct TCP/IP settings on your

wired or wireless clients. Set the IP addresses of the clients within the same subnet of

RT-N11.

Getting an IP address automatically

The RT-N11 Wireless Router integrates DHCP server functions, thus, your PC gets an IP

address automatically.

Note:

Before rebooting your PC, switch ON the

wireless router and ensure that the router is ready.

Setting up the IP address manually

To manually set the IP address, you need to know the

default settings of the Wireless Router:

• IP address: 192.168.1.1

• Subnet Mask: 255.255.255.0

3. Getting started

1 2 3 4 5 6 7 8 9 10 11 12 ... 43 44

No comments

Asus RT-N11 User Manual Page 7