Asus WL-320gP User Manual download pdf (Page 38)

3. Software

38 ASUS 802.11g Access Point

Chapter 3 - Software Conguration

Access Point

DTIM Interval (1-255) – DTIM (Delivery Trafc Indication Message) is

a wireless message used to inform clients in Power Saving Mode when the

system should wake up to receive broadcast and multicast messages. Type

the time interval in which the system will broadcast a DTIM for clients in

Power Saving Mode. The default value (3) is recommended

Beacon Interval (1-65535) – This field indicates the time interval

in milliseconds that a system broadcast packet, or beacon, is sent to

synchronize the wireless network. The default value (100 milliseconds) is

recommended.

Enable Frame Bursting? – This eld allows you to enable frame-bursting

mode to improve performance with wireless clients that also support frame-

bursting.

Radio Power – Radio Power can be set between 1 to 84 but the default

value is recommended.

Enable WMM – This field allows you to enable WMM to improve

multimedia transmission

Enable WMM No-Acknowledgement – This eld allows you to enable

WMM No-Acknowledgement

Mode – This eld allows you set up different operation modes(AP or WDS,

Station or URE) either in AP mode or Gateway mode.

URE – This section allows you set up parameters for URE. This section

only works while in URE mode.

SSID – This is the SSID of root AP. The ASUS 802.11g AP can repeat the

signal and boost the signal coverage while setting in URE mode.

Other security parameters settings are the same as those in Wireless ->

Interface.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 73 74

No comments

Asus WL-320gP User Manual Page 38