Asus FrontLinker User's Guide download pdf (Page 5)

English

Device installation

To install the ASUS FrontLinker™:

1. Remove the cover of an empty 5.25”

drive bay.

We suggest installing the

FrontLinker™ into the upper drive

bay of the PC, not under the optical

drives.

2. Plug the 4-pin ATX power cable into

the ATX power connector on the

FrontLinker™.

3. Insert the FrontLinker™ to the drive bay.

Let all the cables pass inside the PC

case. Carefully push the FrontLinker™

until its screw holes align with the holes

on the drive bay.

4. Secure the FrontLinker™ with screws on

both sides of the drive bay.

We suggest that you place your portable devices on top of the chassis while

connecting to the FrontLinker™.

5. Two Front Panel Audio cables are connected to the FrontLinker™. The shorter one

should be connected with the audio cable from the chassis. For the connection

of another Front Panel Audio cable, refer to step 6.

Cable Chassis connector Description

Front Panel Audio

cable (black

connector) (male)

Connect the shorter cable, with

male connector, to the audio cable

from the chassis.*

If the audio cable from the chassis

is connected to the motherboard,

unplug it rst.

1 2 3 4 5 6 7 8 9 10

No comments

Asus FrontLinker User's Guide Page 5