Asus F2A85-M Specifications Page 44
- Page / 86
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
1-32
Chapter 1: Product introduction
1. MemOK! switch
Installing DIMMs that are incompatible with the motherboard may cause system
boot failure, and the DRAM_LED near the MemOK! switch lights continuously. Press
and hold the MemOK! switch until the DRAM_LED starts blinking to begin automatic
memory compatibility tuning for successful boot.
• Refer to section 1.10 Onboard LEDs for the exact location of the DRAM_LED.
• The DRAM_LED also lights when the DIMM is not properly installed. Turn off the
system and reinstall the DIMM before using the MemOK! function.
• The MemOK! switch does not function under Windows® OS environment.
• During the tuning process, the system loads and tests failsafe memory settings. It
takes about 30 seconds for the system to test one set of failsafe settings. If the test
fails, the system reboots and test the next set of failsafe settings. The blinking speed
of the DRAM_LED increases, indicating different test processes.
• Due to memory tuning requirement, the system automatically reboots when each
timing set is tested. If the installed DIMMs still fail to boot after the whole tuning
process, the DRAM_LED lights continuously. Replace the DIMMs with ones
recommended in the Memory QVL (Qualied Vendors Lists) in this user manual or on
the ASUS website at www.asus.com.
• If you turn off the computer and replace DIMMs during the tuning process, the system
continues memory tuning after turning on the computer. To stop memory tuning, turn
off the computer and unplug the power cord for about 5–10 seconds.
• If your system fail to boot due to BIOS overclocking, press the MemOK! switch to boot
and load BIOS default settings. A message will appear during POST reminding you
that the BIOS has been restored to its default settings.
• We recommend that you download and update to the latest BIOS version from the
ASUS website at www.asus.com after using the MemOK! function.
F2A85-M
F2A85-M MemOK! switch
1.9 Onboard switches
Onboard switches allow you to ne-tune performance when working on a bare or open-case
system. This is ideal for overclockers and gamers who continually change settings to
enhance system performance.
- Motherboard 1
- First Edition 2
- August 2012 2
- Contents 3
- BIOS information 4
- Appendices 5
- Safety information 6
- About this guide 7
- Typography 8
- F2A85-M specications summary 10
- Package contents 12
- Product introduction 13
- Native SATA 6.0 Gb/s support 14
- Gigabit LAN solution 14
- ASUS EPU 14
- ASUS UEFI BIOS (EZ Mode) 14
- 1.2 Before you proceed 17
- 1.3 Motherboard overview 18
- 1.3.3 Motherboard layout 19
- 1.3.4 Layout contents 20
- 1.4.1 Installing the APU 21
- ASUS F2A85-M 23
- 1.5 System memory 24
- 1.5.2 Memory congurations 25
- DDR3-1866 MHz capability 27
- DDR3-1600 MHz capability 27
- DDR3-1333 MHz capability 29
- DDR3-1066 MHz capability 31
- 1.5.3 Installing a DIMM 32
- 1.5.4 Removing a DIMM 32
- 1.6 Expansion slots 33
- 1.6.5 PCI Express x16 slots 34
- 1.7 Jumpers 35
- 1.8 Connectors 36
- 1.8.2 Internal connectors 38
- CPU_FANPWR_FAN 40
- SATA6G_1 SATA6G_2 42
- SATA6G_3 SATA6G_4 42
- SATA6G_5 SATA6G_6 42
- SATA6G_7 42
- PLED SPEAKER 43
- IDE_LED PWRSW RESET 43
- 1.9 Onboard switches 44
- 1.10 Onboard LEDs 45
- F2A85-M GPU Boost LED 46
- 1.11 Software support 47
- 2.1.2 ASUS EZ Flash 2 50
- Recovering the BIOS 51
- 2.1.4 ASUS BIOS Updater 52
- Updating the BIOS le 53
- 2.2 BIOS setup program 54
- BIOS menu screen 55
- Advanced Mode 56
- Menu bar 56
- 2.3 Main menu 58
- Administrator Password 59
- User Password 59
- 2.4 Ai Tweaker menu 60
- 2.4.3 APU Multiplier [Auto] 62
- 2.4.4 NB Frequency [Auto] 62
- 2.4.6 GPU Boost [Auto] 63
- 2.4.7 OC Tuner 63
- 2.4.8 DRAM Timing Control 63
- CPU Current Capability [100%] 64
- 2.5 Advanced menu 66
- 2.5.2 SATA Conguration 67
- 2.5.3 USB Conguration 68
- 2.5.4 NB Conguration 68
- 2.5.6 APM 69
- 2.5.7 Network Stack 70
- 2.6 Monitor menu 71
- CPU Upper Temperature [70] 72
- CPU Lower Temperature [20] 72
- 2.7 Boot menu 74
- 2.7.3 Fast Boot [Enabled] 75
- 2.7.8 CSM Parameters 76
- 2.7.10 Setup Mode [EZ Mode] 77
- 2.7.12 Boot Override 77
- 2.8 Tools menu 78
- 2.9 Exit menu 79
- Chapter 2: Getting started 80
- VCCI Class B Statement 82
- KC: Korea Warning Statement 82
- ASUS contact information 84
- __________ 85
Related products and manuals for Chassis components Asus F2A85-M
Chassis components Asus Z77-A Specifications
(92 pages)
(92 pages)
Chassis components Asus Z87-C Specifications
(96 pages)
(96 pages)
© 2020, manymanuals.com. All rights reserved. | 0.059 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals