Asus Z9PH-D16 User Manual download pdf (Page 57)

ASUS Z9PH-D16 Series 3-3

3.1 Starting up for the rst time

1. After making all the connections, replace the system case cover.

2. Be sure that all switches are off.

3. Connect the power cord to the power connector at the back of the system

chassis.

4. Connect the power to a power outlet that is equipped with a surge protector.

5. Turn on the devices in the following order:

a. Monitor

b. External storage devices (starting with the last device on the chain)

c. System power

6. After applying power, the system power LED on the system front panel case

lights up. For systems with ATX power supplies, the system LED lights up

when you press the ATX power button. If your monitor complies with “green”

standards or if it has a “power standby” feature, the monitor LED may light up

or switch between orange and green after the system LED turns on.

The system then runs the power-on self-test or POST. While the tests are

running, the BIOS beeps or additional messages appear on the screen. If you

do not see anything within 30 seconds from the time you turned on the power,

the system may have failed a power-on test. Check the jumper settings and

connections or call your retailer for assistance.

7. At power on, hold down the <Del> key to enter the BIOS Setup. Follow the

instructions in Chapter 4.

1 ... 56 57 58 ... 192

No comments

Asus Z9PH-D16 User Manual Page 57