Asus AP1720-E1 User Manual Page 92

  • Download
  • Add to my manuals
  • Print
  • Page
    / 124
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 91
4-24
Chapter 4: BIOS Setup
Power Management [User Define]
Allows you to set the automatic power saving features. Configuration
options: [User Define] [Min. Saving] [Max. Saving]
Video Off Method [DPMS]
This item determines the video off features. The Display Power
Management System (DPMS) feature allows the BIOS to control the video
display card if it supports the DPMS feature. [Blank Screen] only blanks
the screen. Use this for monitors without power management or green
features. Configuration options: [DPMS] [Blank Screen] [V/H SYNC+Blank]
Video Off In Suspend [Yes]
This item determines when to activate the video off feature for monitor
power management. Configuration options: [Yes] [No]
Suspend Type [Stop Grant]
Allows you to select the suspend type. Configuration options: [Stop Grant]
[PWR On Suspend]
MODEM Use IRQ [3]
Allows you to select the IRQ assignment for the modem. Configuration
options: [NA] [3] [4] [5] [7] [9] [10] [11]
Suspend Mode [Disabled]
Configuration options: [Disabled] [1 Min] [2 Min] [4 Min] [8 Min] [12 Min]
[20 Min] [30 Min] [40 Min] [1 Hr]
HDD Power Down [Disabled]
Shuts down any IDE hard disk drives in the system after a period of
inactivity as set in this user-configurable field. This feature does not affect
SCSI hard drives. Configuration options: [Disabled] [1 Min] ... [15 Min]
Soft-Off by PWR-BTTN [Instant-Off]
When set to [Instant-Off], the system goes to soft off when you press the
power button for less than 4 seconds. When set to [Delay 4 Sec], press
the power button for more than 4 seconds to power off the system.
Configuration options: [Instant-Off] [Delay 4 Sec.]
Wake-Up by PCI Card [Enabled]
When set to [Enabled], this item allows system wake-up through a PCI
card event. Configuration options: [Disabled] [Enabled]
Page view 91
1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 123 124

Comments to this Manuals

No comments