Asus TR-DLSR User Manual download pdf (Page 32)

100

3. HARDWARE SETUP

ASUS TR-DLSR User’s Manual

3. H/W SETUP

Connectors

6) Two 68-pin Ultra160 SCSI Connectors (SCSI-A, SCSI-B)

This motherboard has two 68-Pin Ultra160 SCSI connectors; one for each of the

two channels. Each channel can support a maximum of 15 devices as specified

by Ultra160 standards.

SCSI Connection Notes

This motherboard has two 68-Pin Ultra160 SCSI connectors; one for each of the

two channels.

The onboard SCSI chipset incorporates an advanced multimode I/O cell that supports

both single-ended (SE), Ultra2, and Ultra160 devices. With Ultra160 devices, the

SCSI bus platform performs at full Ultra160 speeds (up to 160MB/sec) and extended

cabling 12m (or 25m in a point-to-point configuration). When an SE device is

attached, the bus defaults to an SE speed and 1.5m cable length.

IMPORTANT: Connect SCSI devices as shown. Each channel should have only

one type of SCSI standard (e.g. Ultra160, Ultra2, Ultra-Wide). Mixing SCSI devices

on the same channel decreases performance of the slower device.

NOTE: Ultra160 SCSI devices do not have termination jumpers and must

use a separate terminator on the last connector (internal) or device (external).

TR-DLSR

TR-DLSR Onboard SCSI Connectors

3568

34 1

6834

SCSI-A (Internal)

68-Pin Ultra160/Ultra2-Wide SCSI Connector

SCSI-B (External)

68-Pin Ultra160/

Ultra2-Wide SCSI Connector

TR-DLSR

TR-DLSR SCSI Connection Example

68-pin Internal SCSI Cable (Twisted-Pair Ribbon)

68-pin Female

Terminator

Internal SCSI Devices (up to 15 devices)

Channel A

68-pin Internal SCSI Cable (Twisted-Pair Ribbon)

68-pin Female

Terminator

Internal SCSI Devices (up to 15 devices)

Channel B

1 ... 31 32 33 ... 100

Comments to this Manuals

No comments

Asus TR-DLSR User Manual Page 32

Comments to this Manuals

Related products and manuals for Computer hardware Asus TR-DLSR