Asus X900-PI4 User Manual download pdf (Page 68)

ASUS P4T User’s Manual68

4. BIOS SETUP

AC PWR Loss Restart [Disabled]

This allows you to set whether you want your system to reboot after the power has

been interrupted. [Disabled] leaves your system off and [Enabled] reboots your sys-

tem. [Previous State] sets your system back to the state it is before the power inter-

ruption. Configuration options: [Disabled] [Enabled] [Previous State]

PWR Up On external Modem Act [Disabled]

This allows either settings of [Enabled] or [Disabled] for powering up the computer

when the external modem receives a call while the computer is in Soft-off mode.

NOTE: The computer cannot receive or transmit data until the computer and appli-

cations are fully running. Thus connection cannot be made on the first try. Turning

an external modem off and then back on while the computer is off causes an initial-

ization string that will also cause the system to power on. Configuration options:

[Disabled] [Enabled]

Wake On LAN or PCI Modem card [Disabled]

Wake-On-LAN or a PCI modem card allows your computer to be booted from an-

other computer via a network by sending a wake-up frame or signal. Configuration

options: [Disabled] [Enabled]

IMPORTANT: This feature requires an optional network interface with Wake-On-

LAN and an ATX power supply with at least 720mA +5V standby power.

4.5.1 Power Up Control

Power Up Control

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 115 116

No comments

Asus X900-PI4 User Manual Page 68