Asus V7-P5G41E User Manual download pdf (Page 55)

ASUS V-series P5G41E 4-5

To update the BIOS using EZ Flash 2:

1. Visit the ASUS website (www.asus.com) to download the latest BIOS le for

the motherboard.

2. Save the BIOS le to a USB ash disk, then restart the system.

3. You can launch the EZ Flash 2 by two methods.

4.1.2 ASUS EZ Flash 2 utility

The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go

through the long process of booting from a oppy disk and using a DOS-based

utility. The EZ Flash 2 utility is built-in the BIOS chip so it is accessible by pressing

<Alt> + <F2> during the Power-On Self Tests (POST).

(2) Enter BIOS setup program. Go to the Tools menu to select EZ Flash2

and press <Enter> to enable it.

You can switch between drives by pressing <Tab> before the correct le

is found. Then press <Enter>.

4. When the correct BIOS le is found, EZ Flash 2 performs the BIOS update

process and automatically reboots the system when done.

(1) Insert the USB ash disk that contains the BIOS le to the the USB port.

Press <Alt> + <F2> during POST to display the following.

• This function can support devices such as USB ash disk with

FAT 32/16

format and single partition only.

• Do not shut down or reset the system while updating the BIOS to prevent

system boot failure!

ASUSTek EZ Flash 2 BIOS ROM Utility V3.44

Current ROM

Update ROM

Note

FLASH TYPE: MXIC 25L8005

PATH: A:\

BOARD: P5G41E

VER: 0201 (H:00 B:00)

DATE: 12/03/2009

BOARD: Unknown

VER: Unknown

DATE: Unknown

[Enter] Select or Load [Tab] Switch [V] Drive Info

[Up/Down/Home/End] Move [B] Backup [Esc] Exit

1 ... 54 55 56 ... 82

No comments

Asus V7-P5G41E User Manual Page 55