Asus 810E User Manual download pdf (Page 61)

ASUS CUWE User’s Manual 61

4. BIOS SETUP

Advanced Menu

CPU External (FSB) Frequency (MHz) (when CPU Speed is set

to [Manual])

This feature tells the clock generator what frequency to send to the CPU, DRAM,

and chipset. The bus frequency (external frequency) multiplied by the bus mul-

tiple equals the CPU’s internal frequency (the CPU speed). The configuration

options vary depending on the CPU/SDRAM/PCI Freqency Ratio.

CPU Vcore (when CPU Speed is set to [Manual])

This field displays the core voltage supplied to the CPU.

If you want to set it manually, always refer to the CPU

documentation.

CPU Level 1 Cache, CPU Level 2 Cache [Enabled]

These fields allow you to choose from the default of [Enabled] or choose

[Disabled] to turn on or off the CPU’s Level 1 and Level 2 built-in cache.

Configuration options: [Disabled] [Enabled]

CPU Level 2 Cache ECC Check [Disabled]

This function controls the ECC capability in the CPU level 2 cache. Con-

figuration options: [Disabled] [Enabled]

BIOS Update [Enabled]

This functions as an update loader integrated into the BIOS to supply the

processor with the required data. In the default position of [Enabled], the

BIOS will load the update on all processors during system bootup. Configu-

ration options: [Disabled] [Enabled]

PS/2 Mouse Function Control [Auto]

The default of [Auto] allows the system to detect a PS/2 mouse on startup.

If detected, IRQ12 will be used for the PS/2 mouse. IRQ12 will be reserved

for expansion cards only if a PS/2 mouse is not detected. [Enabled] will

always reserve IRQ12, whether on startup a PS/2 mouse is detected or not.

Configuration options: [Enabled] [Auto]

USB Legacy Support [Auto]

This motherboard supports Universal Serial Bus (USB) devices. The de-

fault of [Auto] allows the system to detect a USB device on startup. If de-

tected, the USB controller will be enabled. If not detected, the USB control-

ler will be disabled. When this field is set to [Disabled], the USB controller

is disabled no matter whether you are using a USB device or not. Configu-

ration options: [Disabled] [Enabled] [Auto]

OS/2 Onboard Memory > 64M [Disabled]

When using OS/2 operating systems with installed DRAM of greater than

64MB, you need to set this option to [Enabled]; otherwise, leave this on

[Disabled]. Configuration options: [Disabled] [Enabled]

1 ... 60 61 62 ... 136

No comments

Asus 810E User Manual Page 61