Asus M2N-MX User Manual download pdf (Page 41)

ASUS M2N-MX

2-3

2.1.2 ASUS EZ Flash 2 utility

The ASUS EZ Flash 2 feature allows you to update the BIOS without having

to go through the long process of booting from a oppy disk and using

a DOS-based utility. The EZ Flash 2 utility is built-in the BIOS chip so it

is accessible by pressing <Alt> + <F2> during the Power-On Self Tests

(POST).

To update the BIOS using EZ Flash:

1. Visit the system builder website to download the latest BIOS le for

the motherboard and rename the same to M2N-MX.ROM.

2. Save the BIOS le to a oppy disk or a USB ash disk, then restart the

system.

3. You can launch the EZ Flash 2 by two methods.

(1) Insert the oppy disk / USB ash disk that contains the BIOS le

to the oppy disk drive or the USB port.

Press <Alt> + <F2> during POST to display the following.

ASUSTek EZ Flash 2 BIOS ROM Utility B312

FLASH TYPE: Winbond W39V080A 8Mb LPC

BOARD: M2NSLI Deluxe

VER: 0122

DATE: 04/27/2006

Current ROM

Update ROM

BOARD: Unknown

VER: Unknown

DATE: Unknown

PATH: C:\M2N320C

Note

[Enter] Select [S] Save [ESC] Exit

[Tab] Switch [Up/Down/Home/End] Move

WIN98SE <DIR>

NETTERM <DIR>

DRIVERS <DIR>

RECYCLED <DIR>

WUTEMP <DIR>

NEWFOL~1 <DIR>

INSTALL <DIR>

TEST_REB <DIR>

MSDOWNLD.TMP

<DIR>

(2) Enter BIOS setup program. Go to the Tools menu to select EZ

Flash 2

and press <Enter> to enable it.

You can switch between drives by pressing <Tab> before the correct

le is found. Then press <Enter>.

4. When the correct BIOS le is found, EZ Flash 2 performs the BIOS

update process and automatically reboots the system when done.

• This function can support devices such as USB ash disk, hard disk,

or oppy disk with FAT 32/16/12 format only.

• Do not shut down or reset the system while updating the BIOS to

prevent system boot failure!

1 ... 40 41 42 ... 72

Comments to this Manuals

No comments

Asus M2N-MX User Manual Page 41

Comments to this Manuals

Related products and manuals for Hardware Asus M2N-MX