Asus K52F-C1 User Manual download pdf (Page 3)

DGS-1210-28/52/28P/20 Firmware Release

Notes

Revision History and System Requirement:

Firmware Version

Date

Model

Hardware Version

Runtime: v4.00.012

Boot: 1.00.005

23- Aug.-13

DGS-1210-28

C1 (First release)

Runtime: v4.00.025

Boot: 1.00.012

13- Nov.-13

DGS-1210-52

C1 (First release)

Runtime: v4.00.024

Boot: 1.00.010

13- Nov.-13

DGS-1210-28P

C1 (First release)

Runtime: v4.00.041

Boot: 1.00.012

14- Feb.-14

DGS-1210-20

C1 (First release)

Runtime: v4.00.043

Boot: 1.00.010

18- Mar.-14

DGS-1210-28P

Upgrade Instructions:

D-Link Smart Switches support firmware upgrade via TFTP server. You can download the firmware

from D-Link web site http://tsd.dlink.com.tw, and copy the downloaded firmware to the TFTP

server folder. Please make sure that the TFTP server is accessible from the switch via networks.

Upgrade using CLI (via Telnet)

1. Make sure the network connection between the switch and PC is active.

2. Use software that supports telnet, for example, HyperTerminal or Telnet command in Microsoft

Windows, to connect to the switch. If you are using Telnet command, type the command followed

by the switch IP address, eg. telnet 10.90.90.90.

3. The logon prompt will appear.

The switch will prompt the user to enter his/her username and password. It should be noted that

upon the initial connection, both the default user name and password are admin.

To upgrade the switch firmware, execute the following command:

Command

Function

download{firmware_fromTFTP

tftp://ip-address/filename | cfg_fromTFTP

tftp://ip-address/filename}

Download firmware file from the TFTP

server to the switch.

When completing firmware upgrade, the following messages will pop up.

Device will reboot after firmware upgraded successfully

Image upgraded successfully

1 2 3 4 ... 14

Comments to this Manuals

No comments

Asus K52F-C1 User Manual Page 3

Comments to this Manuals

Related products and manuals for Laptops Asus K52F-C1