Asus H87M-PLUS User Manual download pdf (Page 84)

3-32

Chapter 3: BIOS setup

Chapter 3

Parallel Port Conguration

The sub-items in this menu allow you to set the parallel port conguration.

Parallel Port [Enabled]

Allows you to enable or disable the parallel port (LPT/LPTE).

Conguration options: [Enabled] [Disabled]

The following items appear only when you set the Parallel Port Conguration item to

[Enabled].

Change Settings [Auto]

Allows you to select an optimal setting for Super I/O devices. Conguration

options: [Auto] [IO=378h; IRQ=5;] [IO=378h; IRQ=5,6,7,9,10,11,12;] [IO=278h;

IRQ=5,6,7,9,10,11,12;] [IO=3BCh; IRQ=5,6,7,9,10,11,12;]

Device Mode [STD Printe...]

Allows you to select the Printer Port mode. Conguration options: [STD Printer Mode]

[SPP Mode] [EPP-1.9 and SPP Mode] [EPP-1.7 and SPP Mode] [ECP Mode] [ECP and

EPP 1.9 Mode] [ECP and EPP 1.7 Mode]

Deep S4 [Disabled]

When enabled, the system in S4 state will further reduce power usage and will power off the

USB and PS/2 devices. The system in deep S4 state can be woken up via the power button,

devices in LAN, or other ways except via the USB and PS/2 devices. Conguration options:

[Disabled] [Enabled]

Restore AC Power Loss [Power Off]

[Power On] The system goes into ON state after an AC power loss.

[Power Off] The system goes into OFF state after an AC power loss.

[Last State] The system goes into either OFF or ON state, whatever the system state

was before the AC power loss.

3.6.8 APM

1 ... 83 84 85 ... 132

ChrisMouck 27 Apr 2024 | 10:20:27

Hello, im noob :)

Asus H87M-PLUS User Manual Page 84