Asus P5-99B User Manual download pdf (Page 38)

III. HARDWARE SETUP

ASUS P5-99B User’s Manual38

20. Wake-On-LAN Activity Connector (3-pin WOLCON)

The WOLCON connector allows the system to power up when there is a wakeup

packet or signal is received from the network through the ASUS PCI-L101 LAN

card (see ASUS LAN CARD).

IMPORTANT! This feature requires that the WAKE On LAN Power Up Control is

set to Enabled (see Power Management Setup under BIOS SETUP) and that your

system has an ATX power supply with at least 720mA +5V standby power.

P5-99B Wake-On-LAN Connector

+5 VSB PME

Ground

0 1

21. Wake-On-Ring Connector (2-pin WOR)

The WOR connector connects to internal modem cards with Wake-On-Ring out-

put. The connector powers up the system when a ringup packet or signal is re-

ceived through the internal modem card. NOTE: For external modems, Wake-

On-Ring is detected through the COM port.

IMPORTANT! This feature requires that the PWR UP On Modem Act Power

Up Control is set to Enabled (see Power Management Setup under BIOS SETUP)

and that your system has an ATX power supply with at elast 720mA +5V standby

power.

0 1

WOR

Pin2 Ring#

Pin1 Ground

P5-99B Wake-On-Ring Connector

Connectors

III. H/W SETUP

1 ... 37 38 39 ... 104

No comments

Asus P5-99B User Manual Page 38