Asus P5GD1-VM User Manual Page 67

  • Download
  • Add to my manuals
  • Print
  • Page
    / 92
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 66
ASUS P5GD1-VMASUS P5GD1-VM
ASUS P5GD1-VMASUS P5GD1-VM
ASUS P5GD1-VM
2-232-23
2-232-23
2-23
Advanced Chipset SettingsAdvanced Chipset Settings
Advanced Chipset SettingsAdvanced Chipset Settings
Advanced Chipset Settings
Configure DRAM Timing by SPD [Enabled]
When this item is enabled, the DRAM timing parameters are set
according to the DRAM SPD (Serial Presence Detect). When disabled,
you can manually set the DRAM timing parameters through the DRAM
sub-items. The following sub-items appear when this item is Disabled.
Configuration options: [Disabled] [Enabled]
DRAM CAS# Latency [3 Clocks]DRAM CAS# Latency [3 Clocks]
DRAM CAS# Latency [3 Clocks]DRAM CAS# Latency [3 Clocks]
DRAM CAS# Latency [3 Clocks]
Controls the latency between the SDRAM read command and the
time the data actually becomes available.
Configuration options: [3 Clocks] [2.5 Clocks] [2 Clocks]
DRAM RAS# Precharge [4 Clocks]DRAM RAS# Precharge [4 Clocks]
DRAM RAS# Precharge [4 Clocks]DRAM RAS# Precharge [4 Clocks]
DRAM RAS# Precharge [4 Clocks]
Controls the idle clocks after issuing a precharge command to the
DDR SDRAM. Configuration options: [2 Clocks] [3 Clocks] [4 Clocks]
[5 Clocks]
DRAM RAS# to CAS# Delay [4 Clocks]DRAM RAS# to CAS# Delay [4 Clocks]
DRAM RAS# to CAS# Delay [4 Clocks]DRAM RAS# to CAS# Delay [4 Clocks]
DRAM RAS# to CAS# Delay [4 Clocks]
Controls the latency between the DDR SDRAM active command and
the read/write command. Configuration options: [2 Clocks]
[3 Clocks] [4 Clocks] [5 Clocks]
DRAM RAS# Activate to Precharge Delay [15 Clocks]DRAM RAS# Activate to Precharge Delay [15 Clocks]
DRAM RAS# Activate to Precharge Delay [15 Clocks]DRAM RAS# Activate to Precharge Delay [15 Clocks]
DRAM RAS# Activate to Precharge Delay [15 Clocks]
Configuration options: [4 Clocks] [5 Clocks] ~ [15 Clocks]
DRAM Burst Length [8]DRAM Burst Length [8]
DRAM Burst Length [8]DRAM Burst Length [8]
DRAM Burst Length [8]
Sets the DRAM Burst Length. Configuration options: [4] [8]
Booting Graphic Adapter Priority [PCI/PCI Express]
Allows selection of the graphics controller to use as primary boot
device. Configuration options: [Internal VGA] [PCI Express/Int-VGA]
[PCI Express/PCI] [PCI/PCI Express] [PCI/Int-VGA]
Internal Graphics Mode Select [Enabled, 8MB]
Allows user to select the amount of system memory pre-allocated by
the internal graphics device. Configuration options: [Disabled]
[Enabled, 1MB] [Enabled, 4MB] [Enabled, 8MB] [Enabled, 16MB]
[Enabled, 32MB]
VC1 for Azalia & Root Ports [Enabled]
Enables or disables the VC1 for the Azalia audio ports and other root
ports. Configuration options: [Disabled] [Disabled]
Page view 66
1 ... 66 67 68 ... 92

Comments to this Manuals

No comments