Asus A7V133-VM User Manual download pdf (Page 60)

ASUS A7V133-VM User’s Manual60

4. BIOS SETUP

Onboard FDC Swap A & B [No Swap]

This field allows you to reverse the hardware drive letter assignments of

your floppy disk drives. Configuration options: [No Swap] [Swap AB]

Onboard Serial Port 1 [3F8H/IRQ4]

Onboard Serial Port 2 [2F8H/IRQ3]

These fields allow you to set the addresses for the onboard serial connec-

tors. Serial Port 1 and Serial Port 2 must have different addresses. Configu-

ration options: [3F8H/IRQ4] [2F8H/IRQ3] [3E8H/IRQ4] [2E8H/IRQ10]

[Disabled]

UART2 Use Infrared [Disabled]

When enabled, this field activates the onboard standard infrared feature and sets the

second serial UART to support the infrared module connector on the motherboard. If

your system already has a second serial port connected to the onboard COM2 connec-

tor, it will no longer work if you enable the infrared feature. See Standard and Con-

sumer Infrared Module Connector in 3.8 External Connectors. Configuration op-

tions: [Disabled] [Enabled]

4.4.2 I/O Device Configuration

I/O Device Config

1 ... 59 60 61 ... 96

No comments

Asus A7V133-VM User Manual Page 60