Asus AT3GC-I User Manual download pdf (Page 25)

Chapter 2: BIOS information 2-2

2.1.2 ASUS EZ Flash 2 utility

The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS-based

utility.

ASUSTek EZ Flash 2 BIOS ROM Utility V3.37

Current ROM

Update ROM

Note

FLASH TYPE: MXIC 25L8005

PATH: C:\

BOARD: AT3GC-I

VER: 0204 (H:00 B:00)

DATE: 05/20/2009

BOARD: Unknown

VER: Unknown

DATE: Unknown

[Enter] Select or Load [Tab] Switch [V] Drive Info

[Up/Down/Home/End] Move [B] Backup [Esc] Exit

• Enter the BIOS setup program. Go to the Tools menu to select EZ Flash 2 and

press <Enter> to enable it.

2. Press <Tab> to locate the correct le. Press <Enter>.

When the correct BIOS le is found, EZ Flash 2 performs the BIOS updating process and

automatically reboots the system when done.

• Only a USB ash disk with FAT 32/16 format and single partition supports the ASUS EZ

Flash 2 utility.

• DO NOT shut down or reset the system while updating the BIOS to prevent system boot

failure!

Download the latest BIOS le from the ASUS website at www.asus.com.

To update the BIOS using EZ Flash 2:

1. Insert the USB ash disk that contains the latest BIOS le to a USB port, then launch

EZ Flash 2 in either of the following ways.

• Press <Alt> + <F2> during POST to display the following:

Updating from a BIOS file

a. Select Update BIOS from a le, then click Next.

b. Locate the BIOS le from the Open window, then click Open.

3. Follow the onscreen instructions to complete the updating process.

1 ... 24 25 26 ... 38

No comments

Asus AT3GC-I User Manual Page 25