38 ASUS CUV266 User’s Manual
3. HARDWARE SETUP
Connectors
3. H/W SETUP
8) Infrared Module Connector (5-pin IR_CON)
This connector supports an optional wireless transmitting and receiving infrared
module. This module mounts to a small opening on system cases that support
this feature. You must also configure the setting through UART2 Use Infrared
(see 4.4.2 I/O Device Configuration) to select whether UART2 is directed for
use with COM2 or IrDA. Use the five pins as shown in Back View and connect
a ribbon cable from the module to the motherboard SIR connector according to
the pin definitions. (NOTE: The SIR module does not come with the motherboard
package. The CIR module is currently not available.)
9) Chassis Open Alarm Lead (4-pin CHASSIS)
This lead is for a chassis designed for chassis intrusion detection. This requires
an external detection mechanism such as a chassis intrusion monitor/sensor or
microswitch. When any chassis component is removed, the sensor is triggered
and a high-level signal is sent to this lead to record a chassis intrusion event.The
event is then be processed by software such as LDCM. When not using the
chassis intrusion lead, place a jumper cap over the pins to close the circuit.
CUV266
0 10 1 0 1
CUV266 Infrared Module Connector
Standard Infrared (SIR)
Front View Back View
+5V
IRTX
IRRX
(NC)
GND
SIR
+5V
IRRX
IRTX
(NC)
GND
CIRTX
GND
CIRRX
CIR+5V
CIR
CUV266
0 10 1 0 1
CUV266 Chassis Open Alarm Lead
CHASSIS
Hello! We are Drop Dead Studio and our goal is to help companies achieve impressive sales results through automated marketing. We sell fresh bases for GSA Search Engine Ranker and XRumer as well as a premium base for XRumer. • Bases are updated monthly through 24/7 parsing and by connecting purchased databases from other sources. • You have the option to purchase a one-time fresh database or pay for a lifetime subscription for updates. ATTENTION! 40% discount on base purchases only until