Asus M4A88T-M/USB3 User Manual download pdf (Page 51)

2-8 Chapter 2: BIOS information

LBA/Large Mode [Auto]

Enables or disables the LBA mode. Setting this item to [Auto] enables the LBA mode if the

device supports this mode, and if the device was not previously formatted with LBA mode

disabled. Conguration options: [Disabled] [Auto]

Block (Multi-Sector Transfer) M [Auto]

Enables or disables data multi-sectors transfers. When this item is set to [Auto], the data

transfer from and to the device occurs multiple sectors at a time if the device supports multi-

sector transfer feature. When this item is set to [Disabled], the data transfer from and to the

device occurs one sector at a time. Conguration options: [Disabled] [Auto]

PIO Mode [Auto]

Selects the PIO mode. Conguration options: [Auto] [0] [1] [2] [3] [4]

DMA Mode [Auto]

Selects the DMA mode. Conguration options: [Auto]

SMART Monitoring [Auto]

Sets the Smart Monitoring, Analysis, and Reporting Technology.

Conguration options: [Auto] [Disabled] [Enabled]

32Bit Data Transfer [Enabled]

Enables or disables 32-bit data transfer. Conguration options: [Disabled] [Enabled]

2.3.4 SATA Conguration

The SATA Conguration menu allows you to congure your storage devices. Select an item

then press <Enter> to display the submenu.

OnChip SATA Channel [Enabled]

Enables or disables OnChip SATA Channel. Conguration options: [Disabled] [Enabled]

SATA Port1-Port4 [IDE]

Sets the SATA 1~4 type. Conguration options: [IDE] [RAID] [AHCI]

When this item is set to [IDE], SATA 5~6 can only be set to [IDE].

SATA Port5-Port6 [IDE]

Set the SATA 5~6 type. Conguration options: [IDE] [RAID] [AHCI]

When this item is set to [AHCI], SATA 5~6 can only be used under OS with AHCI driver

installed. Sets this item to [IDE] to use SATA 5~6 before entering OS.

The following two items only appear when you set OnChip SATA Channel to [Enabled].

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 67 68

No comments

Asus M4A88T-M/USB3 User Manual Page 51