Asus P4SE/U2 User Manual download pdf (Page 18)

1-8

Chapter 1: Motherboard Information

1.8 Expansion slots

The P4SE/U2 motherboard has six (6) expansion slots. The following sub-sections

describe the slots and the expansion cards that they support.

1.8.1 Configuring an expansion card

After physically installing the expansion card, configure the card by adjusting the

software settings.

1. Turn on the system and change the necessary BIOS settings, if any.

2. Assign an IRQ to the card. Refer to the tables below.

3. Install the software drivers for the expansion card.

1.7 System memory

The motherboard has three Double Data Rate (DDR) DIMM sockets that supports

up to 3GB non-ECC PC2100/1600 DDR. (Note: PC2700 max. to 4 banks only.)

1. Make sure the memory frequency and bus frequency setting in the

BIOS are the same or set to [Auto] for optimum system performance.

2. A DDR DIMM is keyed with a notch so that it fits in only one direction.

DO NOT force a DIMM into a socket to avoid damaging the DIMM.

3. Visit ASUS website (www.asus.com) for latest DDR333 Qualified Vendor List.

P4SE/U2

P4SE/U2 184-Pin DDR DIMM Sockets

80 Pins

104 Pin

1 ... 17 18 19 ... 63

No comments

Asus P4SE/U2 User Manual Page 18