Asus P5E3 Premium/WiFi-AP@n User Manual Page 52

  • Download
  • Add to my manuals
  • Print
  • Page
    / 198
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 51
2-26 Chapter 2: Hardware information
16. USB 2.0 ports 3 and 4. These 4-pin Universal Serial Bus (USB) ports are
available for connecting USB 2.0 devices.
17. Optical S/PDIF Out port
. This port connects an external audio output device
via an optical S/PDIF cable.
18. USB 2.0 ports 5 and 6.
These 4-pin Universal Serial Bus (USB) ports are
available for connecting USB 2.0 devices.
DO NOT insert different connectors to the external SATA ports.
DO NOT unplug the external Serial ATA box when a RAID 0 or RAID 1 is
congured.
Before creating a RAID set using Serial ATA hard disks, make sure that you
have connected the Serial ATA signal cable and installed Serial ATA hard
disk drives; otherwise, you cannot enter the JMicron RAID utility and SATA
BIOS setup during POST.
If you intend to create a RAID conguration using this connector, set the
J-Micron eSATA/PATA Controller Mode in the BIOS to [RAID]. See section
4.5.3 Onboard Device Conguration for details.
When using hot-plug and NCQ, set the J-Micron eSATA/PATA Controller
Mode in the BIOS to [AHCI]. See section 4.5.3 Onboard Device
Conguration for details.
Before creating a RAID set, refer to
5.4.4 JMicron
®
RAID Conguration or
the manual bundled in the motherboard support DVD.
Page view 51
1 ... 51 52 53 ... 198

Comments to this Manuals

No comments