Asus P5N-E SLI User Manual download pdf (Page 94)

2-42 Chapter 2: BIOS setup

The items Typematic Rate (Chars/Sec) and Typematic Delay (Msec)

becomes user-congurable only when the item Typematic Rate Setting is

enabled.

Boot Up Floppy Seek [Disabled]

Enable this item to allow the BIOS to check a oppy drive during POST.

Conguration options: [Disabled] [Enabled]

Bootup Num-Lock [On]

Allows you to select the power-on state for the NumLock.

Conguration options: [Off] [On]

Typematic Rate Setting [Disabled]

Allows you to set the keystroke rate. Enable this item to congure the

Typematic Rate (Chars/Sec) and the Typematic Delay (Msec).

Conguration options: [Disabled] [Enabled]

Typematic Rate (Chars/Sec) [6]

Allows you to select the rate at which a character repeats when you hold a

key. Conguration options: [6] [8] [10] [12] [15] [20] [24] [30]

Typematic Delay (Msec) [250]

Allows you to set the delay before keystrokes begin to repeat.

Conguration options: [250] [500] [750] [1000]

OS Select For DRAM > 64MB [Non-OS2]

Allows you to select the OS2 to operate system with greater than 64MB of

RAM on the system. Conguration options: [Non-OS2] [OS2]

Full Screen LOGO [Disabled]

Allows you to enable or disable the full screen logo display feature.

Conguration options: [Disabled] [Enabled]

Make sure that the above item is set to [Enabled] if you want to use the

ASUS MyLogo2™ feature.

Halt On [All Errors]

Allows you to error report type.

Conguration options: [All Errors] [No Errors] [All, But Keyboard]

[All, But Diskette] [All, But Disk/Key]

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 121 122

No comments

Asus P5N-E SLI User Manual Page 94