Asus P5Q-EM User Manual download pdf (Page 81)

ASUS P5Q-EM 2-23

NB Voltage [Auto]

Allows you to set the North Bridge voltage. The values range from 1.10V to 1.70V

with a 0.02V interval.

• Setting the CPU PLL Voltage, FSB Termination Voltage, DRAM Voltage and

NB Voltage items to a high level may damage the chipset, memory module

and CPU permanently. Proceed with caution.

• Values of the CPU PLL Voltage, FSB Termination Voltage, DRAM

Voltage and NB Voltage items are labeled in different colors, indicating the

risk levels of high voltage settings. Refer to the table below for details.

• The system may need better cooling system to work stably under high

voltage settings.

Blue Yellow Purple Red

CPU PLL Voltage 1.50V–1.78V 1.80V–2.00V 2.02V–2.20V N/A

FSB Termination Voltage 1.20V–1.38V 1.40V–1.70V N/A N/A

DRAM Voltage 1.80V–1.98V 2.00V–2.20V 2.22V–2.40V 2.42V–2.70V

NB Voltage 1.10V–1.26V 1.28V–1.40V 1.42V–1.58V 1.60V–1.70V

PCIE SATA Voltage [Auto]

Allows you to set the PCI Express SATA voltage. The values range from 1.50V to

1.80V with a 0.10V interval.

Load-Line Calibration [Auto]

Allows you to select the CPU Load-Line mode. Set to [Disabled] to follow Intel

specications, or to [Enabled] to improve CPU VDroop directly.

Conguration options: [Auto] [Disabled] [Enabled]

CPU GTL Reference [Auto]

Allows you to enable or set the CPU GTL voltage reference. Setting a high CPU

voltage may damage the components permanently, and setting a low voltage may

make the system unstable.

Conguration options: [Auto] [0.65x] [0.63x] [0.61x]

CPU Spread Spectrum [Auto]

Set to [Disabled] to enhance FSB overclocking ability or [Auto] for EMI control.

Conguration options: [Auto] [Disabled]

PCIE Spread Spectrum [Auto]

Set to [Disabled] to enhance PCIE overclocking ability or [Auto] for EMI control.

Conguration options: [Auto] [Disabled]

1 ... 80 81 82 ... 122

No comments

Asus P5Q-EM User Manual Page 81