ASUS P5WD2-E PremiumASUS P5WD2-E Premium
ASUS P5WD2-E PremiumASUS P5WD2-E Premium
ASUS P5WD2-E Premium
2-372-37
2-372-37
2-37
•
You may use a 4-pin ATX12V
power plug for this connector.
•
Make sure to remove the cap on
the connector before connecting
an 8-pin EPS +12V power plug.
•
Use only either a 4-pin ATX12V or
an 8-pin EPS +12V power plug.
Connecting other power plug types
may cause serious damage to the
system.
Important notes on motherboard power requirementsImportant notes on motherboard power requirements
Important notes on motherboard power requirementsImportant notes on motherboard power requirements
Important notes on motherboard power requirements
•
For a fully configured system, we recommend that you use a power
supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or
later version) and provides a minimum power of 400 W.
•
Do not forget to connect the 8-pin/4-pin EATX12 V power plug;
otherwise, the system will not boot up.
•
Make sure that the PSU can support at least 8 A on the +12V_1
lead and 13 A on the +12V_2 lead.
•
The ATX 12 V Specification 2.0-compliant (400 W) PSU has been
tested to support the motherboard power requirements with the
following configuration:
CPU : Intel
®
Pentium
®
4 3.73 GHz Extreme Edition
Memory : 512 MB DDR2 (x 4)
Graphics cards : 1 x PCIe x16 ATI CrossFire Edition card
1 x PCIe x16 ATI CrossFire-ready card
Parallel ATA device : IDE hard disk drive
Serial ATA device : SATA hard disk drive (x2)
Optical drives : DVD-RW
•
Use of a PSU with a higher power output is recommended when
configuring a system with more power consuming devices. The
system may become unstable or may not boot up if the power is
inadequate.
•
If you want to use two high-end PCI Express x16 graphics cards, use
a PSU with 450 to 500 W power to ensure system stability.
•
To support an Intel
®
Dual-Core CPU up to 840 Extreme Edition, make
sure that the PSU can provide at least DC 16A (peak 22A) on the
+12V_2 lead. The vendors list on the next page is provided for your
reference.
Connect aConnect a
Connect aConnect a
Connect a
4-pin power4-pin power
4-pin power4-pin power
4-pin power
plug hereplug here
plug hereplug here
plug here
Remove the capRemove the cap
Remove the capRemove the cap
Remove the cap
before using anbefore using an
before using anbefore using an
before using an
8-pin power plug8-pin power plug
8-pin power plug8-pin power plug
8-pin power plug
2x4-pin EATX12V
Comments to this Manuals