Asus P8H61-M2/TPM/SI User Manual download pdf (Page 27)

1-15Chapter 1: Product introduction

10. Digital audio connector (4-1 pin SPDIF_OUT)

This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port.

SPDIF_OUT

+5V

SPDIFOUT

GND

P8H61-M2/TPM/SI

P8H61-M2/TPM/SI Digital audio connector

The S/PDIF module is purchased separately.

11. Chassis intrusion connector (4-1 pin CHASSIS)

This connector is for a chassis-mounted intrusion detection sensor or switch. Connect

one end of the chassis intrusion sensor or switch cable to this connector. The chassis

intrusion sensor or switch sends a high-level signal to this connector when a chassis

component is removed or replaced. The signal is then generated as a chassis intrusion

event.

By default, the pin labeled “Chassis Signal” and “Ground” are shorted with a jumper

cap. Remove the jumper caps only when you intend to use the chassis intrusion

detection feature.

P8H61-M2/TPM/SI

P8H61-M2/TPM/SI Chassis intrusion connector

GND

Chassis Signal

+5VSB_MB

CHASSIS

1 ... 26 27 28 ... 59

No comments

Asus P8H61-M2/TPM/SI User Manual Page 27