Asus P8P67 User Manual download pdf (Page 40)

2-22 Chapter 2: Hardware information

Chapter 2

2.2.8 Internal connectors

1. Intel

P67 Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1/2 [gray])

These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0

Gb/s signal cables.

If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10

conguration with the Intel

Rapid Storage Technology through the onboard Intel

P67

chipset.

• These connectors are set to [AHCI Mode] by default. If you intend to create a Serial

ATA RAID set using these connectors, set the

SATA Mode

item in the BIOS to [RAID

Mode]. Refer to section

3.5.4 SATA Conguration

for details.

• When using NCQ, set the

SATA Mode

item in the BIOS to [AHCI Mode]. Refer to

section

3.5.4 SATA Conguration

for details.

• Before creating a RAID set, refer to section

4.4 RAID congurations

or the manual

bundled in the motherboard support DVD.

• You must install Windows

XP Service Pack 3 or later versions before using Serial

ATA hard disk drives. The Serial ATA RAID feature is available only if you are using

Windows

XP SP3 or later versions.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 135 136

No comments

Asus P8P67 User Manual Page 40