Asus K7V User Manual download pdf (Page 67)

ASUS K7V User’s Manual 67

4. BIOS SETUP

I/O Device Config

Onboard FDC Swap A & B [No Swap]

This field allows you to reverse the hardware drive letter assignments of

your floppy disk drives. Configuration options: [No Swap] [Swap AB]

Floppy Disk Access Control [R/W]

When set to [Read Only], this field protects files from being copied to floppy

disks by allowing reads from the floppy disk drive but not writes. The setup

default [R/W] allows both reads and writes. Configuration options: [R/W]

[Read Only]

Onboard Serial Port 1 [3F8H/IRQ4]

Onboard Serial Port 2 [2F8H/IRQ3]

These fields allow you to set the addresses for the onboard serial connec-

tors. Serial Port 1 and Serial Port 2 must have different addresses. Configu-

ration options: [3F8H/IRQ4] [2F8H/IRQ3] [3E8H/IRQ4] [2E8H/IRQ10]

[Disabled]

UART2 Use Standard Infrared [Disabled]

When enabled, this field activates the onboard standard infrared feature and sets the

second serial UART to support the infrared module connector on the motherboard. If

your system already has a second serial port connected to the onboard COM2 connec-

tor, it will no longer work if you enable the infrared feature. See IrDA-Compliant

Infrared Module Connector in 3.8 External Connectors. Configuration options:

[Disabled] [Enabled]

4.4.2 I/O Device Configuration

1 ... 66 67 68 ... 110

No comments

Asus K7V User Manual Page 67