Asus P4V533-MX User's Guide download pdf (Page 21)

ASUS P4V533-MX motherboard user guide

1-11

1.8.2 Installing the CPU

Follow these steps to install a CPU.

1. Locate the 478-pin ZIF socket on the motherboard.

2. Unlock the socket by pressing the

lever sideways, then lift it up to a 90°-

100° angle.

Make sure that the socket lever is lifted

up to 90°-100° angle, otherwise the

CPU does not fit in completely.

3. Position the CPU above the socket

such that its marked corner matches

the base of the socket lever.

4. Carefully insert the CPU into the

socket until it fits in place.

The CPU fits only in one correct orientation. DO NOT force the CPU into the

socket to prevent bending the pins and damaging the CPU!

5. When the CPU is in place, push

down the socket lever to secure the

CPU. The lever clicks on the side tab

to indicate that it is locked.

Socket Lever

90 - 10

Gold Mark

6. Install a CPU heatsink and fan

following the instructions that came

with the heatsink package.

7. Connect the CPU fan cable to the

CPU_FAN1 connector on the

motherboard.

1 ... 20 21 22 ... 60

No comments

Asus P4V533-MX User's Guide Page 21