Asus P5Q-E User Manual download pdf (Page 90)

3-20 Chapter 3: BIOS setup

3.4.12 CPU Voltage [Auto]

Allows you to set the CPU VCore voltage. The values range from 0.85000V to

2.10000V* with a 0.00625V interval.

• Refer to the CPU documentation before setting the CPU Vcore voltage.

Setting a high VCore voltage may damage the CPU permanently, and

setting a low VCore voltage may make the system unstable.

• The value [2.10000V] of the CPU Voltage item is supported only if the

OV_CPU jumper is enabled, otherwise the maximum voltage supported is

[1.70000V]. See 2. CPU / Northbridge overvoltage setting on page 2-19

for details.

3.4.13 CPU GTL Voltage Reference(0/2) [Auto]

Allows you to set the CPU GTL voltage reference. The values range from 0.370x

to 0.760x with a 0.005x interval. Different ratio might enhance CPU overclocking

ability.

3.4.14 CPU GTL Voltage Reference(1/3) [Auto]

Allows you to set the CPU GTL voltage reference. The values range from 0.410x

to 0.800x with a 0.005x interval. Different ratio might enhance CPU overclocking

ability.

3.4.15 CPU PLL Voltage [Auto]

Allows you to set the CPU PLL voltage. The values range from 1.50V to 2.78V with

a 0.02V interval.

3.4.16 FSB Termination Voltage [Auto]

Allows you to set the front side bus termination voltage. The values range from

1.20V* to 1.90V with a 0.02V interval.

The minimum value of this item becomes 1.10V when a 45nm CPU is installed.

3.4.17 DRAM Voltage [Auto]

Allows you to set the DRAM voltage. The values range from 1.80V to 3.08V with a

0.02V interval.

3.4.18 NB Voltage [Auto]

Allows you to set the North Bridge voltage. The values range from 1.10V to 2.2V*

with a 0.02V interval.

1 ... 89 90 91 ... 192

No comments

Asus P5Q-E User Manual Page 90