Asus A7V-VM Specifications download pdf (Page 10)

10 ASUS A7V-VM User’s Manual

2. HARDWARE SETUP

2. H/W SETUP

Expansion Cards

2.7 Expansion Cards

WARNING! Unplug your power supply when adding or removing expansion

cards or other system components. Failure to do so may cause severe damage to

both your motherboard and expansion cards.

2.7.1 Expansion Card Installation Procedure

1. Read the documentation for your expansion card and make any necessary hard-

ware or software settings for your expansion card, such as jumpers.

2. Remove your computer system’s cover and the bracket plate on the slot you

intend to use. Keep the bracket for possible future use.

3. Carefully align the card’s connectors and press firmly.

4. Secure the card on the slot with the screw you removed above.

5. Replace the computer system’s cover.

6. Set up the BIOS if necessary

7. Install the necessary software drivers for your expansion card.

2.7.2 Assigning IRQs for Expansion Cards

Some expansion cards need an IRQ to operate. Generally, an IRQ must be exclu-

sively assigned to one use. In a standard design, there are 16 IRQs available but

most of them are already in use, leaving 6 IRQs free for expansion cards. If your

motherboard has PCI audio onboard, an additional IRQ will be used. If your moth-

erboard also has MIDI enabled, another IRQ will be used, leaving 4 IRQs free.

1 ... 9 10 11 ... 22

No comments

Asus A7V-VM Specifications Page 10