Asus M2N-MX SE PLUS Specifications download pdf (Page 29)

ASUS M2N-MX SE PLUS 1-17

1.7.3 Installing a DIMM

1. Unlock a DIMM socket by

pressing the retaining clips

outward.

2. Align a DIMM on the socket

such that the notch on the DIMM

matches the break on the socket.

3. Firmly insert the DIMM into the

socket until the retaining clips

snap back in place and the

DIMM is properly seated.

Make sure to unplug the power supply before adding or removing DIMMs or

other system components. Failure to do so may cause severe damage to both

the motherboard and the components.

1.7.4 Removing a DIMM

To remove a DIMM:

1. Simultaneously press the retaining

clips outward to unlock the DIMM.

2. Remove the DIMM from the socket.

Support the DIMM lightly with your ngers when pressing the retaining clips.

The DIMM might get damaged when it ips out with extra force.

DDR2 DIMM notch

• A DDR2 DIMM is keyed with a notch so that it ts in only one

direction. DO NOT force a DIMM into a socket to avoid damaging the

DIMM.

• The DDR2 DIMM sockets do not support DDR DIMMs. Do not install

DDR DIMMs to the DDR2 DIMM sockets.

Unlocked retaining clip

DDR2 DIMM notch

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 89 90

No comments

Asus M2N-MX SE PLUS Specifications Page 29