Asus MEW-L User Manual download pdf (Page 19)

ASUS MEW-L User’s Manual 19

3. HARDWARE SETUP

Motherboard Settings

3. H/W SETUP

2) I/O Voltage Setting (VIO)

This jumper allows you to select the voltage supplied to the DRAM, chipset,

PCI, and the CPU’s I/O buffer. The default voltage should be used unless pro-

cessor overclocking requires a higher voltage.

Setting VIO

Normal [1-2] (default)

3.66V [2-3]

MEW-L VIO Setting

Normal Add 0.1 Volt

123

VIO

0 10 10 1

MEW-L

WARNING! Using a higher voltage may help when overclocking but may result

in the shortening of your computer component’s life. It is strongly recommended

that you leave this setting on its default.

3) Onboard Audio Setting (AUDIO CODEC)

The onboard audio CODEC may be enabled or disabled using all of these jump-

ers. Disable the onboard audio CODEC if you are using an ISA or PCI audio card

on any of the expansion slots or a primary AMR on the AMR slot (see AMR Slot

later in this section). If using an ISA or PCI audio expansion card, Onboard AC’97

Audio Controller in 4.4.2 I/O Device Configuration must also be disabled.

Setting AUDIO CODEC

Enable [1-2] [1-2] [1-2] [1-2] (default)

Disable [2-3] [2-3] [2-3] [2-3]

MEW-L Audio Codec Setting

DisableEnable

SPK

ADN#

AUD_EN1

AUD_EN2

SPK

ADN#

AUD_EN1

AUD_EN2

0 10 10 1

MEW-L

1 ... 18 19 20 ... 128

No comments

Asus MEW-L User Manual Page 19